Display MKA Statistics

Procedure

To enter User EXEC mode, log on to the switch.
Display MKA statistics for a specific port:

show macsec mka statistics {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Example

The following example displays MACsec MKA statistics for a port.

Switch:1>show macsec mka statistics 1/3
==========================================================================================
                       MKPDU Statistics on interface 1/3
==========================================================================================
         MKPDUs Validated & Rx           : 1630
         Rx Distributed SAK              : 2
         MKPDUs Transmitted              : 1694
         Tx Distributed SAK              : 0
------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------

Variable Definitions

Use the data in the following table to use the show macsec mka statistics command.


Variable	Value
`{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}`	Identifies the slot and port in one of the following formats: a single slot and port (slot/port) a range of slots and ports (slot/port-slot/port) a series of slots and ports (slot/port,slot/port,slot/port) all ports on the same slot (slot/all) all ports on the switch (all) If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.